Navigation Contact Us Phone Us

Delphi Technologies Directional Brake Pads

Date: 2nd June, 2021

 

 

An even quieter ride with Delphi Technologies directional brake pads

As automotive technology evolves, and with it customer expectations for a quieter more relaxing ride, noise, vibration and harshness (NVH) reducing technologies are becoming a must. Whilst the emergence of quieter, electric and hybrid vehicle technologies should, in theory, lower NVH levels, the reality is very different – the loss of the engine masking sound is simply exposing other areas such as suspension, HVAC and braking – noises that may not have been obvious to the driver beforehand. Add to this greater emphasis on the whole in-car experience, with ever sophtisticated infotainment and connectivity systems, and noise issues are becoming an area of increasing concern for vehicle and parts manufacturers alike.

Cue our range of directional brake pads. Featuring either a chamfered friction surface or a crescent cut out of the shim, they must be mounted in a specific direction for optimal pad to disc contact. By introducing the pad to the disc at a gentle angle, the likelihood of both noise and vibration is significantly reduced for even quieter braking.

 

Chamfer or crescent?

You won’t be surprised to learn that chamfer directional brake pads use a chamfer, a transitional surface between two adjoining faces, on either the leading edge or both edges of the pad. This helps to prevent the leading edge of the pad from lifting from the disc for maximum pad to disc contact, encourages even pad wear and reduces both noise and vibration.

Similarly, a crescent cut-out directional brake pad has a crescent or half-moon shape cut out from the shim. The shim, made up of finely tuned layers of dampening material bonded to the pad assembly, helps to reduce both the transmission and amplitude of vibration and acts as a thermal barrier, ensuring uniform temperatures across the pad, and in turn consistent brake torque. The addition of a cut-out allows the piston to push the brake pad at the optimal angle, reducing noise and aiding even pad wear. 

 

It’s all in the fitting

Whilst chamfer and shims are nothing new - we’ve been fitting them on our pads, as per the OE, for years – the way the pads are installed is. As their name suggests ‘directional pads’ must be installed in a specific direction to ensure optimal noise performance. In contrast, fitting them in the wrong direction can reduce braking efficiency, and may increase the possibility of brake noise, the very thing these pads are designed to prevent. Because of this, it pays to take the time to learn how to install them the right way.

 

Which way is right?

Many Delphi Technologies directional pads use either a letter, indicating which side of the vehicle the pad should be fitted to, or an arrow showing the rotational direction of the disc and hence the direction in which the pad should be fitted. If no arrow is present, then the following ground rules apply:

  • For pads fitted with a one chamfer, introduce the chamfer, the largest if more than one, at the leading edge where the pad and disc first come into contact.
  • If the pad features a cut-out, position the crescent or half-moon at the leading edge of the pad.

 

Media Library - Directional brake pads - chamfer

Media Library - Directional brake pads - crescent

Delphi Technologies Directional Brake Pads

More News

16Aug

Timing Belts, Maintenance-Free

12May

Brand new DMF locked? Tips from LuK

29Apr

Lambda Sensor Damages by Oil

News Archive

 

Antispam Code Cannot read this code: Change
Processing
All rights reserved © 2022 qualvecom.com
Web Development by KL Studios

Please Wait

Please Wait
close
Scroll to Top

This website wishes to use third-party cookies to ensure that you have the best possible experience. If you'd like to accept the use of these cookies, you can do so below. Please note that not accepting third-party cookies can disrupt the website experience. Full details and controls are available in our cookie policy with further details available in our privacy statement.

Accept Selection Accept All